|
bead filters by Aquadine
|
 |
|
|
|
Used primarily for Koi ponds or ponds where the filtration equipment is run away from the pond. Engineered specifically for ponds with millions of 1/8" diameter plastic beads that get coated with bacteria to break-down fish waste naturally. Reliable and low-maintenance. They do not clog!
Since bead filter systems are sealed and pressurized, there are few design limitations. The water to be filtered can be drawn over the pond edge, through the pond wall, or through a bottom drain. The pump and filter system can be installed above ground, below ground, or a distance from the pond--whatever is the least visible or most convenient location. Regardless of what design is chosen, unions must be used for each of the pipe connections to facilitate removal of the multi-port valve for internal cleaning, and sufficient vertical clearance must be left to remove the valve (approx. twice the tank height).
|
|
|
|
|
|
|
ultima II cyclonic filters by Aqua
|
|
|
|
|
|
Unique tubular design protects bacteria while dislodging unwanted debris. Features Aqua-tube non-clumping biomedia in 6 different sizes. No channeling, only minutes to backwash. Works with low amp, high flow pumps. All have 1 1/2" valve, except 6000 model has 2" valve.
|
|
|
|
|
|
|
living ponds waterfall filters by Savio
|
|
|
|
|
|
Super strong injection molded housing. 22" waterfall weir. Top feed design eliminates check valve, settling cone and bottom drain. Effective for up to 5,000 gallon pounds. 20 year limited warranty. 7 1/2" overhang. Also holds 2 rolls of Springflo.
|
|
|
|
|
|
